Produse pentru pentru aer (21)

Fonctionne sur la pression de l'eau Fonctionne sans electricité ni air comprimé • Se raccorde sur un robinet et dilue automatiquement un produit nettoyant ou désinfectant avec de l’eau. • Idéal pour pulvériser des produits nettoyants sur des voitures, camions et autres véhicules. • Livré avec une lance de pulvérisation en inox. Equipé d’une buse à jet plat. • La dilution exacte est définie grâce aux 14 buses calibrées de couleurs fournies. Vous avez le choix entre 16 dilutions différentes entre 0.5 % et 12 %. • Raccord entre le pistolet et le tuyau de lavage. • Pression de service entre 2 et 6 bar. • 2 modèles : pour 1 produit ou pour 2 produits. Le modèle pour 2 produits est livré avec une lance de pulvérisation et une lance en pvc sans buse. 801.000.100 - tuyau de 10 m – lance de 60 cm 801.000.200 - tuyau de 15 m – lance de 60 cm 801.000.300 - tuyau de 25 m – lance de 90 cm 801.000.302 - tuyau de 25 m + lance télescopique 2 x 1 m 801.000.

Air Cargo - Services

In dusty environments, we recommend the use of filter mats. This makes the units easier to clean. The filter will need to be replaced at regular intervals, depending on the level of contamination. Rittal cooling units are low-maintenance and are supplied without filter mats. Filter mats may be used for extreme conditions. SK Filter mat, for wall-mounted cooling units SK 3255, WHD: 350x245x10 mm Benefits:Temperature-resistant from -40 °C...+80 °C Material:Open-celled polyurethane foamed plastic Dimensions:Width: 350 mm Height: 245 mm Depth: 10 mm eCl@ss 8.0/8.1:27180706 Packs of:3 pc(s) Weight/pack:0.072 kg EAN:4028177039315 Customs tariff number:56039390 ETIM 7.0:EC002513 ETIM 6.0:EC002513 eCl@ss 8.0/8.1:27180706 eCl@ss 6.0/6.1:27180706

This fan speed controller is used to control EC fan speed. The unregulated output can control a water valve or an electric heating element. Via the rotary knob the temperature can be set between 5 - 35°C. Fan speed is regulated manually in 5 steps, there's an Off-position and automatic mode. In automatic mode a temperature sensor PT500 is required. Choice between cooling/heating mode can be done via Modbus communication or a jumper. This controller can be connected to our SenteraWeb or a BMS-system. .

Deze mobiele koeler bestaat uit een binnen- en een buitenunit. De buitenunit voert de warmte en condenswater af en kunt u op het dak, tegen een buitenmuur of simpelweg op de grond plaatsen. De binnenunit plaats u in de af te koelen ruimte. Beide units worden verbonden door een flexibel slangenset met een lengte van 5m, 10m of 20m. Koelvermogen:6.7 kW Luchtdebiet:1500 m³/h Stroomvoorziening:230V/1Ph/50Hz

The door is equipped with autoreinsertion technology. In case of an accidental crash, the curtain reinserts itself again. This unique system avoids time loss and reduces the risk of high repair costs. The soft bottom edge minimizes damage in case of accidental hit. Single-layer curtain The C ARCTIC 5 has a single-layer curtain, allowing the separation of two freezer areas without condensation. The curtain of the C ARCTIC 5 is made of food-grade material, adapted to the food industry. Maximum height:H 4.000 mm Maximum width:W 3.000 mm Opening speed:up to 0.8 m/s Closing speed:up to 0.8 m/s

Minimum number of participants: 15 Maximum number of participants: Unlimited Duration: 3 hours ENQUIRE TODAY Example of menu Menu Example: Fish soup Zeebruges style **** Lemon sole with leek, white wine sauce and tomatoes **** Ice dessert A few highlights of the A medieval open air museum Request more information about our trips Whether you are looking for an extensive programme or some specific services, we make your escape perfect. CONTACT

Neutralises odours coming from tobacco, pets, fast food, paint, urine, meat, fish, smoke and fire odour, chlorine, etc. Also destroys bacteria and viruses and reduces their growth. No expensive labour cost. Once switched on the unit works independently and ensures an odourless and sterile atmosphere. No need for expensive refills of (spray) chemicals. Ideal applications : Car dealers and hiring, fire damage restoration, carwash, hotels rooms, slaughterhouses, meat and fish processing, pharmaceutical industrie, mortuaries, garbage compactors. Dimensions:480 x 160 x 250 mm Composition of the housing:Stainless steel Coverage area:700 m³

De SANI-ZONE is een compacte maar zeer krachtige ozongenerator. Ozon is een van de krachtigste vernietigers van virussen en bacteriën die in de natuur voorkomen. Het vernietigt ook schimmels, gisten en slechte geuren van tabak, huisdieren, voedsel en chemicaliën. Ozon is een gas dat hoeken en scheuren kan binnendringen die normaal moeilijk schoon te maken of te bereiken zijn, waardoor een effectieve behandeling van de hele ruimte wordt gegarandeerd. De ozon module kan eenvoudig vervangen worden door de gebruiker. Er is geen service of tussenkomst vereist van de leverancier. De Sani-Zone is uitstekend geschikt voor het verwijderen van slechte geuren, virussen en bacteriën in kantoren, scholen, ziekenhuizen, hotels en restaurants, voedingswinkels en fabrieken, sportscholen, auto’s, vrachtwagens, boten, ... Ook beschikbaar in compact automodel (105.100.120). Ozon productie:7000 mg Maximum oppervlakte:120 m² Toepassingstijd:1/2 tot 3 uur

The SANI-ZONE is a compact yet powerful ozone diffuser. Ozone is one of the most powerful destroyers of viruses and bacteria found in nature. It also destroys molds, yeasts and bad odors from tobacco, pets, food and chemicals. Ozone is a gas that can penetrate corners and cracks that normally are hard to clean or reach, ensuring in this way an effective treatment of the entire space. The ozon cartridge can easily and safely be replaced by the operator. There is no extra service required from supplier. The Sani-Zone is a great choice for removing odours, viruses and bacteria in offices, schools, hospitals, hotels and restaurants, food shops and factories, gyms, cars, trucks and boats, ... Also available in compact car model (105.100.120). Ozone output:7000 mg Application area:120 m² Application time:1/2 to 3 hours

Eliminates bad odours in used cars and replaces them with a fresh pleasant odour. Very efficient against odours from tobacco, pets, fast food etc. High production of ozone gives immediate results and reduces treatment time. Destroys bad odours permanently. Dimensions:480 x 160 x 250 mm Composition of the housing:Stainless steel Coverage area:700 m³

Werkt op waterdruk Geen electriciteit of perslucht nodig • Worden aangesloten op een watertoevoer en verdunnen automatisch een reinigingsproduct met water. • Ideaal om reinigingsproducten op personenwagens, vrachtwagens en andere voertuigen te sprayen. • Voorzien van vlakstraalsproeikop • De juiste verdunning wordt ingesteld aan de hand van een set gekleurde meettipjes • 16 verschillende verdunningen kunnen ingesteld worden tussen 0.5 % en 12 %. • Snelkoppeling tussen pistool en slang. • Werkdruk tussen 2 en 6 bar. 801.000.100 - 10 m slang – lans 60 cm 801.000.200 - 15 m slang – lans 60 cm 801.000.300 - 25 m slang – lans 90 cm 801.000.302 - 25 m slang + telescopische lans 2 x 1m 801.000.120 - 10 m slang – lans 60 cm en CA terugslagklep 801.000.220 - 15 m slang – lans 60 cm en CA terugslagklep 801.000.320 - 25 m slang – lans 90 cm en CA terugslagklep 801.000.322 - 25 m slang + telescopische lans 2 x 1m en CA terugslagklep

Works on water pressure No electricity or compressed air needed • Are connected to a water supply and automatically dilute a cleaning product with water. • Perfect for spraying cleaning products on cars, trucks and other vehicles. • Spray lance in stainless steel. Equipped with a fanjet nozzle. • The correct dilution is set based on a set of coloured measuring tips. • 16 different dilutions may be set between 0.5 % and 12 %. • Quick coupling between gun and hose. • Operating pressure between 2 and 6 bar. 801.000.100 - 10 m hose – lance 60 cm 801.000.200 - 15 m hose – lance 60 cm 801.000.300 - 25 m hose – lance 90 cm 801.000.302 - 25 m hose + telescopic lance 2 x 1 m 801.000.120 - 10 m hose – lance 60 cm and backflow preventer CA 801.000.220 - 15 m hose – lance 60 cm and backflow preventer CA 801.000.320 - 25 m hose – lance 90 cm and backflow preventer CA 801.000.322 - 25 m hose + telescopic lance 2 x 1 m and backflow preventer CA

The Foam Booster produces a very dry foam. Perfect for cleaning vehicles. - Compressed air foamer with operating pressure of 6 bar - Produces extra thick foam even with low foaming cleaning products - For a professional result with a small investment - Dilute the desired product before adding it to the 1 L tank FIELDS OF APPLICATION - Cleaning of vehicles - Cleaning of walls, floors and machines in the food industry Capacity:1 L Weight:870 g Operating Pressure:6.3 till 7 bar Packaging:8 pcs/carton

De Breezer MACH4 is de nieuwe uitvoering van de originele Breezer. De MACH 4 ziet er stoerder uit en heeft een watertank van 341 L, maar heeft verder dezelfde kenmerken en technische eigenschappen als zijn voorganger. Deze krachtige en mobiele adiabatische koeler op stevige wielen heeft een luchtdebiet van bijna 24.000m³/u. Dankzij de interne watertank van maar liefst 341 liter kan dit toestel tot 5 dagen autonoom werken (bij een gemiddelde gebruiksduur van 10-12 uren per dag). U hoeft enkel de stekker in te steken en klaar. De ventilator oscilleert onder een hoek van 70° waardoor een groot bereik gekoeld kan worden. Dankzij de inklapbare ventilator is de Breezer makkelijk en compact op te bergen. Dit toestel is uitermate geschikt voor comfortkoeling op evenementen, grote ruimtes waar veel stralingswarmte is (van bijvoorbeeld ovens), werkplaatsen en ateliers,… Luchtdebiet:24000m³/u Inhoud watertank:341 L

The STR-1-15L22 is a transformer fan speed controller with which you can manually regulate the fan speed of single-phase motors in 5 steps. The unit also has an off-position. It needs a 230 VAC/50-60 Hz supply voltage and has an unregulated output of 230 VAC that can control a damper, an external status indicator, etc. This output is active as soon as the motor is enabled. The sinusoidal shape of the generated motor voltage results in an exceptionally quiet motor operation and extended service life. The special impregnated coating reduces the electrical noise from the built-in autotransformer. This series is available in different amperes. The casing of the controllers up to 7,5 A is made from high quality plastic, while the models above 7,5 A have a metal housing. This transformer doesn't need any configuration. Once installed, it's ready for use.

This control unit has two 0-10 Volt outputs to regulate the EC fans. Via the 2 tacho inputs you can directly monitor the status of the fans and their speed, if tacho signals are available on the fans. HVAC sensors or potentiometers can be connected to the unit, via Modbus RTU communication or 2 analogue inputs. The built-in 24 VDC power supply can feed the external sensors or potentiometers. The controller itself needs a supply voltage between 85 - 305 VAC. Application specific firmware is needed for the unit to function. This firmware can be downloaded via Senteraweb, our online HVAC portal, where we already made a limited number of specific firmware version available, used in typical HVAC applications like destratification. The only thing that needs to be done is to select the appropriate functionality on the solution page of our website and download the firmware. No additional programming is required. TCMF8 is also available - for AC fan speed control.

This circular motorised damper is suitable for ducts with 125 mm. The position of the damper blade can be set via Modbus RTU communication or a 0-10 V signal. The enclosure has an airtightness class D according to EN1751. To ensure this classification aluminium tape should be wrapped on the seam between damper/duct. The unit needs 24 VDC supply voltage. We recommend using Sentera 24 VDC power supplies with RJ45 connector. They are protected against overload, overvoltage and short circuit. Once installed the device is ready for use. The default settings will suffice for most applications. If you do need to change some parameters, this can be done via Modbus RTU communication.

Stepless regulation of EC fans, AC fan speed controllers or frequency inverters is what this potentiometer stands for. It has an off-position and the output value depends on the position of the rotary knob on the front. This potentiometer has a dry contact output that can be used to remotely switch on/off a fan, open/close a damper etc. The dry contact will be open when the know is turned completely counter clockwise. The input voltage for this potentiometer can lie between 0 - 24 VDC. The version handling 0 - 12 VDC is called the MTP-X10K-NA. The splash-proof housing of both potentiometers allows flush (IP44) or surface mounting (IP54).

This controller regulates the fan speed of single-phase motors from 1,5 to 10 A via phase angle control a.k.a. Triac technology. The supply voltage of 230 VAC can be turned off via the illuminated ON/OFF switch on the side of the unit. Via de potentiometer located on the front of the controller you can set the desired fan speed. Minimum speed can be adjusted via an internal trimmer and kickstart/softstart by adding/removing a jumper on the PCB of the controller. This controller is typically used to regulate the speed of AC fans or centrifugal pumps in HVAC systems. The regulator is also available with TK monitoring. This function will deactivate the motor in case of overheating. The code for this type of regulator suitable for 1,5 A is ITRS-15-DT.

This self-calibrating CO2 sensor measures CO2 as well as temperature, relative humidity and ambient light conditions. It needs a 24 VAC supply voltage. This sensor can also directly control an EC-fan, AC fan speed controller or frequency inverter. It has 1 single analogue / modulating output depending on the highest measured value for temperature, humidity or carbon dioxide. If you only want to use it for measuring CO2, you can deactivate the temperature or humidity measurement. The FCMFX-series are available for different types of supply voltages such as 24 VDC, 24 VAC/VDC or 230 VAC. All version have 3 LEDS on the frontpanel showing whether the measured value is within or out of range. Additionally they are available in a version with audible alert. All parameters are accessible via Modbus RTU. This sensor doesn't need to be configured. Once installed it's ready for use.